*1The LED will blink in a pattern of ON for 0.9 seconds and then OFF for 0.3 seconds If the connection fails, check the error code on the printed report. If your wireless device is connected successfully, the WiFi LED lights up and the machine prints your machine's wireless status report. The machine will search for a WLAN access point/router that supports Wi-Fi Protected Setup or AOSS™ for two minutes. The machine starts the one-push wireless setting mode. Press and hold the WiFi button on your machine for about two seconds. Press the WPS or AOSS™ button on your wireless access point/router. Press (Power On/Off) to turn on the machine and make sure only the Ready LED ( ) lights up. Make sure that the power cord is plugged in and the top cover is closed. For more details, refer to the instructions provided with your access point/router. Confirm your LAN access point/router has the WPS or AOSS™ symbol as shown below. To use WPS or AOSS™, your LAN access point/router must support WPS or AOSS™. If you have a LAN access point/router supporting WPS (Wi-Fi Protected Setup™) or AOSS™ (Workstation One-Touch Secure System), you can easily connect your Brother machine to your wireless network as below.

How to connect to wps